Posts Tagged ‘Air Filters’

When Should You Check Your AC Filters: Some Advice from Dayton

Monday, October 10th, 2011

The filters on your air conditioning unit are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a Dayton professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.

Monthly Checks

So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.

Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.

Changing an AC Filter

If your filter is ready for a swap, here are some quick tips to get the job done:

  • Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
  • Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
  • Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.

Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Simple Filter Tips From Liberty on How to Keep Your Ducts Clean

Monday, September 19th, 2011

If there’s one thing you can count on with a home comfort system in Liberty, it’s that there will be higher energy bills in the summer and an increase in dust and debris in your ductwork. But, luckily the latter can be fixed with a few simple filtration upgrades in your home.

The Nature of a Forced Air System

When you flip the switch on your thermostat and your air conditioner or furnace turns on, it starts drawing air from inside your house, conditioning it to the right temperature, and then circulating it back into your rooms through an air handler and ductwork. Of course, a good system should have proper ventilation to circulate new air into the house, but let’s face it – no matter how much ventilation you have in your home, there will always be dust and debris from things like pets, plants and other common household items.

So, when the air gets circulated back through the ducts, all sorts of debris and sediment build up. That’s not to mention the possible presence of actual contaminants like bacteria or mold. Luckily, because of how your forced air system is built, these are not tough problems to deal with.

Installing the Right Filters

Filtration is incredibly important for adding the right level of protection to your home’s ductwork. Usually placed directly within your air handlers, whole house air filters are designed to capture particles as small as 0.3 microns (if you purchase a high quality HEPA filter). That pretty much covers all dust, sediment, pollen, dander and other common allergens.

There are a number of other upgrades you can make to capture just about everything you house spits into those ducts – from bacteria and viruses to smoke and other air pollutants, but at the very least a good filter system will save your lungs, cut back on duct cleaning costs and make it much easier to maintain your home’s air quality throughout the year.

To learn more about HEPA filters and the specific ratings offered in various products, here is a link to the EPA’s guide to home air cleaners. It has a handy breakdown of different types of filtration and what each filter grade can capture.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

Why Are Cleans Filters So Important to AC Efficiency? A Question From Silsbee

Wednesday, September 14th, 2011

Air conditioners cost a lot of money to operate in Silsbee – especially when they don’t work at 100% efficiency. So, it is important to perform the various regular maintenance tasks that ensure the system uses as little electricity as possible. The first thing on your list (and the easiest) is cleaning those filters.

Keeping Filters Clean

The Department of Energy’s Energy Savers website states that you can reduce your air conditioner’s energy consumption by as much as 15% simply by keeping the air filters clean. Why do they matter so much? Consider the nature of a filter.

The filter on your AC unit is designed to capture any dust, debris and sediment in the air supply. If that dust and sediment was allowed in, not only would it gum up the mechanical workings of the device, it would get into your ductwork and reduce the air quality of your home. So, filters are used to capture such things. However, when a filter gets clogged, the system must work harder to draw the air in. As it works harder, the motor turns faster and more electricity is used.

It takes very little to clog the filter of an AC unit, especially if it is running 24 hours a day for two or three months out of the year. So, it’s best to check your filters once every 30 days regardless of what type of filter you are using.

Which Filters to Check

The main filter on your AC unit should be checked along with any air handler filters and any air cleaner filters you have installed in your system. Another thing to consider is the condition of your home and the area around your outdoor condenser. If you have pets, lots of plants or your condenser is located in a dusty area, you may need to check and change those filters even more often.

Most filters are located along the return length of the ductwork – sometimes in ceiling ducts and walls, though they may also be located in your furnace’s air handler or inside the air conditioning unit. If you have window units or mini splits, the filters are frequently in the unit.

Clean air filters are important for your health, your wallet and the longevity of your AC system. Stay on top of them and you will save money in more ways than you might expect.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off