Posts Tagged ‘Heat Pumps’

Raywood Heat Pump Installation Question: Do I Need to Supplement a Heat Pump with Another Heating System?

Monday, January 9th, 2012

People often turn to heat pumps as a solution for their Raywood home heating and cooling needs because they want a single, all-inclusive system that covers all the bases. The convenience and simplicity is part of the allure of choosing a heat pump to begin with.

However, it’s not always that simple. There are situations where a heat pump is not enough to handle the needs of the whole home. This doesn’t necessarily mean that the whole idea goes out the window, but the heat pump may need some help in the form of a supplementary heating supply.

Here are some reasons/situations that may call for a supplemental heat source in addition to a heat pump:

  1. A Cold Climate – Although heat pumps can serve as the primary heating system when temperatures drop as low as 30 degrees Fahrenheit, they have trouble keeping up when the cold snap lasts longer than a few days. In any climate where temperatures dip below this mark for a length of time, a supplemental heating system is recommended.
  2. A Large Home – Heat pumps come in many different sizes, but if yours does not have the capacity to match the size of your home, then it won’t be able to heat the whole house. It’s as simple as that. If you are installing a new heat pump, be sure to get one that is properly sized. But, if you have an existing heat pump that is overmatched by your home’s size, simply supplementing it may be the easiest solution.
  3. The Power Goes Out – A heat pumps’ use of electricity is a benefit in most situations, but unfortunately it means they are helpless when the power goes out. To avoid suffering in the winter chill when a storm takes out a local power line, have a backup/supplemental heat source on hand to use until the power comes back on.

Those are a few situations you may encounter in which supplementing a heat pump is a good idea. Remember, though, that each situation is different. When installing a new heat pump, consult with the professional installer beforehand to see if you should also have a supplemental heat system in addition to the heat pump in your Raywood home.

Easy Ways to Lower Your Anahuac Heat Pump’s Energy Bill

Wednesday, December 14th, 2011

One of the biggest advantages of having a heat pump in Anahuac is that it is highly efficient for both heating and cooling. There is always room for improvement, though, so here some tips to lower your energy bill even more:

  • Get it checked. It’s been said many times before, but it’s always worth saying again: consistent maintenance is one of the biggest keys to keeping any appliance running efficiently. Get your heat pump inspected by a Anahuac HVAC contractor at least once a year. This will keep it in good shape and provide an opportunity to make small repairs, before they have a chance to turn into big problems.
  • Keep it clean. When it comes to HVAC equipment, a clean unit is an efficient unit. Check and replace the filters regularly, according to the manufacturer’s instructions. Keep the coils and fan clean. This will also be part of the annual maintenance, but you can – and should — do touch up cleaning on your own.
  • Install a thermostat. A programmable thermostat is a great energy efficiency tool for any home heating and cooling system, not just a heat pump. A thermostat will keep the temperatures lower during the day or any time no one is home, so that you are not wasting heat.
  • Let it run. It may seem counterintuitive, but turning off a heat pump to save energy may actually do more harm than good. Heat pumps operate most efficiently when they stay running on a regular basis. The components don’t need to take time to spin up, and the refrigerant stays warm so it can keep moving. Your best bet is to have your heat pump connected to a programmable thermostat, program it and then stop thinking about it. You’ll save a bundle over manual operation.
  • Protect the outdoor unit. The outdoor portion of your heat pump has to put up with a lot from the elements. Strong winds can damage them or negatively impact the efficient operation of the pump, so keep the outdoor unit protected from wind.

These simple measures, in combination with a highly efficient heat pump, will help slash your energy bills. In addition, check to see if your heat pump is eligible for a federal tax credit, which can save you even more money.

Pinewood Heating Tip: Heat Pump Emergency Settings

Monday, December 12th, 2011

While installing or inspecting your Pinewood home’s heat pump, you may have noticed that little switch or button labeled something like “Emergency Mode.” And then, you probably scratched your head and thought, “what is that for?”

Hopefully, the emergency setting is not something you will ever have to use. But, it is there for a reason, so it’s possible you may have to resort to it at some point. In that case, it makes sense to know what it is first.

The emergency setting on your heat pump interrupts the normal operation of the device. The compressor shuts off, so the heat pump no longer pumps heat from the outside into the home. Instead, the internal heating element is activated. This backup system is designed to provide a sufficient, albeit minimal, amount of heat when the heat pump is not working properly. The idea is that the element can keep your home warm enough while you get the heat pump fixed.

That’s what the emergency setting is, but when would you use it?

It’s not a trick question. As the name implies, you only want to use this setting in an emergency. For example, if the heat pump has frozen and isn’t operating, the best course of action is to switch on the emergency mode and call a Pinewood professional to repair it.

You would also want to use the emergency mode when recovering from a power outage. Any time a heat pump is without power for more than thirty minutes the refrigerant can cool and get too thick to properly flow through the coils. Turning the pump back on in this situation can damage it, so instead you would use the emergency mode for a while to warm the refrigerant back up, then return to operating the heat pump normally.

The emergency setting is not to be used in place of a supplemental heating system. If there is an uncharacteristic cold snap, and your heat pump can’t keep up, then it makes sense to use the emergency setting to keep the house warm. Using the emergency heat setting regularly is not a good idea.

Is a Heat Pump Right for Your Home? A Guide from Bridge City

Friday, November 11th, 2011

Deciding which type of home comfort system to go with in your Bridge City home can be a difficult process to navigate. There are a ton of factors to take into account including how much you will be using the system, what type of fuel you mainly rely on and what the specific climate is like where you live.

Heat pumps are a great home comfort solution for many people but they aren’t always the appropriate choice. However, there are many benefits to going with a heat pump system, so this is certainly an option you should keep in mind as you evaluate your options.

Heat pumps work by extracting heat from the air in one place and then transferring that heat to another space. For instance, in the winter, heat pumps take heat from the outside air and pump it into your house. In the summer, on the other hand, your heat pump will be able to take heat from your indoor air and pump it back outside, thereby keeping your home cool and comfortable.

Heat pumps are also extremely energy efficient because they don’t actually have to generate the heat they pump. Unlike furnaces, which take in fuel and convert it into heat, heat pumps simply harness the heat that’s already there, making them by far the more energy efficient option.

Another benefit to heat pumps is that they maintain a more constant temperature than many other types of heating systems do. Rather than pumping in a big blast of hot air and then waiting until the temperature indoors falls below a preset level before doing it again, heat pumps provide a relatively constant stream of warm air.

The initial amount of heat is smaller than what you might be used to from a furnace, but the cumulative effect means that you’ll be able to enjoy a much more consistently comfortable indoor environment.

It is important to evaluate the climate in your area before you decide to purchase a heat pump, though. These systems are extremely effective at heating and cooling your home as long as temperatures stay above the mid-thirties.

Below that, you may need to install some type of supplemental heating in order to keep your home warm enough on those really cold days. So if you live in an area where temperatures routinely dip below freezing for large portions of the winter, a heat pump might not be the most sensible solution for you.

Do Heat Pumps Work for Air Conditioning? A Question From Nederland

Friday, September 23rd, 2011

It’s possible that in the course of your search for a new air conditioning system in Nederland, you read or were told about heat pumps. Doesn’t sound right, does it – heat pumps providing cooling for your home? Regardless of the seeming misnomer, heat pumps are actually much older and more reliable cooling technology than you know. And once you understand how these units work, the name makes much more sense.

What Is a Heat Pump?

Technically every refrigerant containing air conditioner is some form of heat pump. A heat pump is a device that removes heat from one area and transfers it to another. So, in the case of your air conditioner, warm air cycles into the condenser, the heat is removed, and the cooled air is circulated back through your home. The actual science behind this is slightly more complicated, but the gist is simple – cold air isn’t produced and then pumped into your home; warm air is removed.

Your refrigerator and freezer operate under the same principle. It works so well that it’s been a standard technology for nearly 100 years, albeit with quite a few upgrades and enhancements. So, if an air conditioner already is a heat pump, why are these devices called something different? Because heat pumps can do so much more.

Heat Producing Heat Pumps

A true heat pump can work in two directions. It can extract heat from your home or it can extract heat from outside and pump it into your home. A true heat pump offers year round climate control because it both heats and cools – not too shabby if you think about the cost of a furnace and central AC system. And with modern green technology, heat pumps can even be connected to geothermal systems that draw their energy from the earth – saving a tremendous amount of money.

So, back to the main question – should you purchase a heat pump for your air conditioning needs? The short answer is “it depends”. For the most part, a heat pump is comparable to the same air conditioning model in terms of energy efficiency and capacity. The major difference is its ability to heat your home. So, if you are interested in ditching the furnace or boiler, it may be a great upgrade. If not, a standard air conditioner can get the job done equally well.