Posts Tagged ‘Mauriceville’

Important Things to Remember When Installing a Central Air Conditioner in Beaumont

Monday, April 2nd, 2012

A good central air conditioner is a huge upgrade for most homeowners. If you’ve been using window units for the last few years or have an older central unit that simply doesn’t get the job done any longer, a brand new central unit will feel incredible. But, before you run out and hire someone to install your new Beaumont central air conditioner, there are a few things to remember.

  • Space – Make sure you have enough space for both the outdoor unit and the indoor evaporator coils.  If space is limited, there are smaller units that will use less and still provide a decent amount of cooling.
  • Supply Registers – Make sure there are enough registers in your home, in the rooms where you need the cooled air. Insufficient depositing of cooled air won’t keep you cool and will run up your energy bill.
  • Ducting – Check the duct work and make sure it can support an air conditioning system. Seal up any ducts leading into spaces you don’t want cooled like the attic or the basement.
  • Condensing Unit – Clear away a space outside where your condensing unit will be placed. It should be clear of debris and be easy to maintain throughout the year, even in the winter when snow might block it in. It should also be easy to access for installation and annual maintenance.
  • Sizing – When you call a professional, they should properly size your home and match it to a central air conditioner that fits your needs. Something too small won’t provide the level of cooling you need and something too large will cycle on and off frequently, costing you more money and putting unnecessary stress on the machine.

If you’re ready for a central air conditioner and want to start the processor, call a Beaumont HVAC professional, such as Efficient Systems, who can help you go through each of these issues and make sure your home is ready for the new device. Once you’ve done that, you can select a model and have it installed.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Raywood Heat Pump Installation Question: Do I Need to Supplement a Heat Pump with Another Heating System?

Monday, January 9th, 2012

People often turn to heat pumps as a solution for their Raywood home heating and cooling needs because they want a single, all-inclusive system that covers all the bases. The convenience and simplicity is part of the allure of choosing a heat pump to begin with.

However, it’s not always that simple. There are situations where a heat pump is not enough to handle the needs of the whole home. This doesn’t necessarily mean that the whole idea goes out the window, but the heat pump may need some help in the form of a supplementary heating supply.

Here are some reasons/situations that may call for a supplemental heat source in addition to a heat pump:

  1. A Cold Climate – Although heat pumps can serve as the primary heating system when temperatures drop as low as 30 degrees Fahrenheit, they have trouble keeping up when the cold snap lasts longer than a few days. In any climate where temperatures dip below this mark for a length of time, a supplemental heating system is recommended.
  2. A Large Home – Heat pumps come in many different sizes, but if yours does not have the capacity to match the size of your home, then it won’t be able to heat the whole house. It’s as simple as that. If you are installing a new heat pump, be sure to get one that is properly sized. But, if you have an existing heat pump that is overmatched by your home’s size, simply supplementing it may be the easiest solution.
  3. The Power Goes Out – A heat pumps’ use of electricity is a benefit in most situations, but unfortunately it means they are helpless when the power goes out. To avoid suffering in the winter chill when a storm takes out a local power line, have a backup/supplemental heat source on hand to use until the power comes back on.

Those are a few situations you may encounter in which supplementing a heat pump is a good idea. Remember, though, that each situation is different. When installing a new heat pump, consult with the professional installer beforehand to see if you should also have a supplemental heat system in addition to the heat pump in your Raywood home.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Things You Can Do to Make Your Orangefield Heating and Cooling System More Effective

Monday, December 5th, 2011

Have you ever wondered why it is too hot or too cold in your Orangefield home? You can always blame it on the thermostat or an open or closed window. Those are easy targets. But maybe the real culprit is your heating and cooling system, namely your furnace or air conditioner. Maybe these pieces of equipment have to work extra hard because of something as simple as a dirty filter that you should have cleaned or replaced.

Learning how to make your heating and cooling system more “effective” does not require a physics degree or an extensive knowledge of the refrigeration cycle. In most cases, it just takes common sense – and a little creativity.

For example, did you know that how your home is insulated can have a direct impact on how well your heating and cooling equipment functions? It sure can. If your walls, crawl spaces, or attic is poorly insulated or not insulated at all, your furnace and air conditioner will have to work harder to keep up – and keep you warm or cool. In some cases, your heating and cooling equipment might never be able to give you the desired temperature on your thermostat setting because the equipment has to work too hard to make up for lost heat or cooling due to poor insulation.

So what should you do? Find out if your home is properly insulated by having a load calculation or energy audit on your home. Any licensed and qualified heating and cooling contractor will be able to perform one of these tasks for you and show you where you might be losing too much of your indoor air to poor insulation. This same test can also detect any leakage through cracks in the foundation or joints or connections in ductwork. Windows and skylights are also an area of heat loss or gain. Installing awnings or trees can cut down on this loss or gain, too.

One way to make a heating and cooling system operate more effectively is to combine insulation and leak sealing. Here’s how that works. Uninsulated metal ductwork can make a heating and cooling system work harder, especially when it is located in poorly insulated areas like crawlspaces and attics. Warm air moving through a cold space slows the heating process and makes a furnace work harder to achieved desired temperature settings. Similarly, cool air passing through hot metal ductwork makes the air conditioner work harder. By wrapping insulation around the metal ductwork, you can stop heating or cooling your attic and crawlspace and send that conditioned air to the rooms that need it.

Another way to “assist” your heating and cooling system is to help with its air flow. In some homes, floor vents are built near outside walls or windows. Warm or cool air is vented up along the walls and windows and never flows evenly in the room. The solution is to buy inexpensive plastic air diverters which attach to the vents using magnets on the diverter. You can adjust the diverter to changing the air flow to the places that need it most – occupied spaces.

Of course, the most effective heating and cooling system is one that is serviced and properly maintained on a regular basis. If you have any questions on system maintenance, call your local heating and cooling contractor and schedule a tune-up today.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

Did You Change that Furnace Filter? A Tip from Beaumont

Monday, November 21st, 2011

No matter what type of furnace you have, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require a Beaumont professional’s help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a professional come out and complete the necessary repairs.

Tags: , , , , , ,
Posted in Heating | Comments Off

How Does a Heat Pump Work? A Question from Hardin

Monday, November 14th, 2011

If you’re in the market for a new home heating and cooling system in Hardin, a heat pump is definitely an option worth considering. However, while the popularity of these systems is growing rapidly, many people still don’t understand what they’re all about. Before you go out and get yourself a new home comfort system, you should make sure you really know what you’re looking at

As their name suggests, heat pumps move heat from one location to another. However, their name can be misleading as well. Heat pumps are able to both heat your home in the winter and keep it cool in the summer by taking heat from the air in one place and sending it to another.

For example, your heat pump will remove the heat from your indoor air in the summer and pump it outside to keep your home cool. In the winter, the process is reversed, and the heat pump gathers heat from the outdoor air and pumps it inside to keep you house warm.

Of course, it’s not hard to see how the air inside your home in the summer has heat in it. But the outdoor air in the winter is cold. So how does a heat pump heat your house with cold air? Well, the truth is that there is almost always some heat in the air, no matter how cold it seems to you and me.

In fact, the temperature would have to drop well into the negative range before there was absolutely no heat to be found in the air. And heat pumps are specially designed to find that heat and collect it.

Basically all heat pumps work on this principle. However, they can’t keep your house comfortable all on their own. Heat pumps are usually installed as part of a complete home heating and cooling system. This means they’ll be paired with an air handler that can circulate the temperature controlled air throughout the house.

There are also some heat pumps that supplement the amount of heat they’re able to pull out of the air by heating it as it passes through. These types of heat pumps are often more effective in cooler areas, but because they require more energy to actually generate heat, they’re not typically as energy efficient as models that rely on their ability to get heat only out of the air.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Save Money in the Long Haul with AC Maintenance in Pinewood

Wednesday, September 28th, 2011

Every year, it’s recommended that you have an HVAC contractor visit your Pinewood home and tune up your air conditioner. This visit will ensure the system is ready for intense, regular use. How much money can this visit save you, though? Let’s take a closer look.

Cost of Operating Your Air Conditioning

An air conditioning system on average costs a homeowner between $500 and $1500 per year to operate depending on the length of the cooling season and the efficiency of that air conditioner. That number represents top efficiency for the unit, however. When a system has dirty filters, hasn’t been cleaned properly or the thermostat is no longer calibrated accurately, the cost increases – sometimes dramatically.

Just how much more could you be spending on cooling each month when this happens? The EPA’s Energy Star website estimates an increase in cost of between 10-30% resulting from poorly maintained systems, and it can be even higher if your system is old and is severely affected by a drop in energy efficiency.

Annual Tune Up Necessities

So, what should be at the top of your tune up list? If you call a contractor, they will perform a variety of tasks including:

  • Inspect Coolant and Pressure Systems
  • Calibrate the Thermostat
  • Tighten Wiring, Capacitors, Relays and Contacts
  • Clean the Evaporator Coil
  • Clear and Clean the Condenser and Condensate Drain
  • Inspect the Condenser Fan and Motor
  • Check Compressor Efficiency

This is just a starter list for standard tune up of a central air conditioning unit. You can supplement this tune up by checking your filters once every 30 days and clearing away debris from around any outdoor units. You should also check your thermostat monthly to ensure it is working properly. If not, call for an inspection to avoid heavy increases in operating costs.

Major repairs to your air conditioning system generally take less than a day and when you’re on an annual maintenance plan, they cost significantly less than if you needed someone to fix the device in an emergency situation.

Tags: , , ,
Posted in Air Conditioning | Comments Off