Posts Tagged ‘Orange County’

Raywood Heat Pump Installation Question: Do I Need to Supplement a Heat Pump with Another Heating System?

Monday, January 9th, 2012

People often turn to heat pumps as a solution for their Raywood home heating and cooling needs because they want a single, all-inclusive system that covers all the bases. The convenience and simplicity is part of the allure of choosing a heat pump to begin with.

However, it’s not always that simple. There are situations where a heat pump is not enough to handle the needs of the whole home. This doesn’t necessarily mean that the whole idea goes out the window, but the heat pump may need some help in the form of a supplementary heating supply.

Here are some reasons/situations that may call for a supplemental heat source in addition to a heat pump:

  1. A Cold Climate – Although heat pumps can serve as the primary heating system when temperatures drop as low as 30 degrees Fahrenheit, they have trouble keeping up when the cold snap lasts longer than a few days. In any climate where temperatures dip below this mark for a length of time, a supplemental heating system is recommended.
  2. A Large Home – Heat pumps come in many different sizes, but if yours does not have the capacity to match the size of your home, then it won’t be able to heat the whole house. It’s as simple as that. If you are installing a new heat pump, be sure to get one that is properly sized. But, if you have an existing heat pump that is overmatched by your home’s size, simply supplementing it may be the easiest solution.
  3. The Power Goes Out – A heat pumps’ use of electricity is a benefit in most situations, but unfortunately it means they are helpless when the power goes out. To avoid suffering in the winter chill when a storm takes out a local power line, have a backup/supplemental heat source on hand to use until the power comes back on.

Those are a few situations you may encounter in which supplementing a heat pump is a good idea. Remember, though, that each situation is different. When installing a new heat pump, consult with the professional installer beforehand to see if you should also have a supplemental heat system in addition to the heat pump in your Raywood home.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Your Crystal Beach Heat Pump Settings and Your Comfort Level

Wednesday, December 28th, 2011

Your Crystal Beach home’s heat pump has a number of settings that can affect your overall comfort level. One of those settings is the fan – which can be set to run automatically when heating is needed or left on continuously so that the device never turns off. Which is better for your home, though? Let’s take a look.

Comfort vs. Economy

The reason there are two settings on your heat pump is that one is more economical. The auto setting allows the device to minimize how often it is on. So, it only turns on when the house needs warm air to maintain the thermostat setting.

On the other hand, the always on setting is designed to provide better comfort. When you leave your heat pump’s fan on continuously, it provides steady heat over time. This means that the temperature remains consistent and mixes the air to ensure there are no uncomfortable pockets of poorly conditioned air in your home somewhere.

Which Is Better?

In terms of comfort level, it depends on your needs. If you’re not too picky about the exact temperature of your home, the auto setting is best because you will save money and it tends to be fairly accurate. However, if you want to ensure you and your family are perfectly comfortable, regardless of the weather outside, the always on setting is the best way to achieve this level of comfort.

Of course, if you’re concerned about the added cost of leaving the heat pump fan on all the time, you can adjust the thermostat to even out the cost. By raising the thermostat 2 degrees in the summer and lowering it 2 degrees in the winter, the added cost of running it constantly should be offset. If it isn’t, you should have your device inspected to ensure both of the settings are properly calibrated.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Question from Evadale: What Makes a Furnace High Efficiency?

Friday, December 16th, 2011

You’ve probably heard in Evadale about the new lines of high efficiency furnaces being released by popular home heating companies, but what exactly is different about these high efficiency devices from your current furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people in Evadale are interested in high efficiency furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money.

If you have an old furnace that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Tags: , , , , , ,
Posted in Heating | Comments Off

Did You Change that Furnace Filter? A Tip from Beaumont

Monday, November 21st, 2011

No matter what type of furnace you have, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require a Beaumont professional’s help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a professional come out and complete the necessary repairs.

Tags: , , , , , ,
Posted in Heating | Comments Off

Is a Heat Pump Right for Your Home? A Guide from Bridge City

Friday, November 11th, 2011

Deciding which type of home comfort system to go with in your Bridge City home can be a difficult process to navigate. There are a ton of factors to take into account including how much you will be using the system, what type of fuel you mainly rely on and what the specific climate is like where you live.

Heat pumps are a great home comfort solution for many people but they aren’t always the appropriate choice. However, there are many benefits to going with a heat pump system, so this is certainly an option you should keep in mind as you evaluate your options.

Heat pumps work by extracting heat from the air in one place and then transferring that heat to another space. For instance, in the winter, heat pumps take heat from the outside air and pump it into your house. In the summer, on the other hand, your heat pump will be able to take heat from your indoor air and pump it back outside, thereby keeping your home cool and comfortable.

Heat pumps are also extremely energy efficient because they don’t actually have to generate the heat they pump. Unlike furnaces, which take in fuel and convert it into heat, heat pumps simply harness the heat that’s already there, making them by far the more energy efficient option.

Another benefit to heat pumps is that they maintain a more constant temperature than many other types of heating systems do. Rather than pumping in a big blast of hot air and then waiting until the temperature indoors falls below a preset level before doing it again, heat pumps provide a relatively constant stream of warm air.

The initial amount of heat is smaller than what you might be used to from a furnace, but the cumulative effect means that you’ll be able to enjoy a much more consistently comfortable indoor environment.

It is important to evaluate the climate in your area before you decide to purchase a heat pump, though. These systems are extremely effective at heating and cooling your home as long as temperatures stay above the mid-thirties.

Below that, you may need to install some type of supplemental heating in order to keep your home warm enough on those really cold days. So if you live in an area where temperatures routinely dip below freezing for large portions of the winter, a heat pump might not be the most sensible solution for you.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Save Money in the Long Haul with AC Maintenance in Pinewood

Wednesday, September 28th, 2011

Every year, it’s recommended that you have an HVAC contractor visit your Pinewood home and tune up your air conditioner. This visit will ensure the system is ready for intense, regular use. How much money can this visit save you, though? Let’s take a closer look.

Cost of Operating Your Air Conditioning

An air conditioning system on average costs a homeowner between $500 and $1500 per year to operate depending on the length of the cooling season and the efficiency of that air conditioner. That number represents top efficiency for the unit, however. When a system has dirty filters, hasn’t been cleaned properly or the thermostat is no longer calibrated accurately, the cost increases – sometimes dramatically.

Just how much more could you be spending on cooling each month when this happens? The EPA’s Energy Star website estimates an increase in cost of between 10-30% resulting from poorly maintained systems, and it can be even higher if your system is old and is severely affected by a drop in energy efficiency.

Annual Tune Up Necessities

So, what should be at the top of your tune up list? If you call a contractor, they will perform a variety of tasks including:

  • Inspect Coolant and Pressure Systems
  • Calibrate the Thermostat
  • Tighten Wiring, Capacitors, Relays and Contacts
  • Clean the Evaporator Coil
  • Clear and Clean the Condenser and Condensate Drain
  • Inspect the Condenser Fan and Motor
  • Check Compressor Efficiency

This is just a starter list for standard tune up of a central air conditioning unit. You can supplement this tune up by checking your filters once every 30 days and clearing away debris from around any outdoor units. You should also check your thermostat monthly to ensure it is working properly. If not, call for an inspection to avoid heavy increases in operating costs.

Major repairs to your air conditioning system generally take less than a day and when you’re on an annual maintenance plan, they cost significantly less than if you needed someone to fix the device in an emergency situation.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Why the SEER Is Important When Choosing an Air Conditioner: A Tip From Saratoga

Friday, September 9th, 2011

There are many things to take into account when you are trying to pick out a new air conditioning system in Saratoga. You want one that will be powerful enough to cool the required space but not so big that it turns your home into a walk in freezer. With so many models and types on the market, it can be difficult to figure out what details you need to pay attention to and what you can ignore.

The seasonal energy efficiency rating (SEER) that each air conditioner comes with is not something you should ever disregard, however. This number is a reflection of the overall energy efficiency of the unit and it can have a huge impact on the amount you pay to keep running your air conditioner every month. The higher the SEER of a product, the more energy efficient it is and the lower your monthly bills will be.

Of course, air conditioners with a higher SEER also generally come with a higher price tag, so you will have to weigh the amount of your potential savings against the difference in price of units with different SEERs.

To calculate this, you will need to know exactly how much more energy efficient one model is compared to the others. For instance, when you know that an air conditioner with a SEER of 11 is 7% more efficient than one with a SEER of 10, you are in a better position to evaluate the potential savings.

You will still need to translate this into dollars, of course, because the amount you save with a 7% boost in efficiency will depend largely on how much you typically pay already. If you are only paying around $320 a year with a SEER 10 air conditioner, upgrading to a SEER 11 will only save you about $30. However, if your annual cooling bills are closer to $1000, you will easily save close to $150 with this small upgrade.

SEER numbers go much higher than 10 and 11 too. In fact, the highest you will probably get is a 19.5 SEER, but that will more than cut your cooling bills in half if you are starting with a SEER 10. Still, the actual amount that you will save depends on how much you were paying to begin with, but if your cooling bills are already very high, it may be worth it to invest in an expensive but very high efficiency system.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off