Posts Tagged ‘Orangefield’

Orangefield Q/A: What is That Noise Coming From My Central Air Conditioner?

Wednesday, March 28th, 2012

Good air conditioners in Orangefield are life savers in the midst of a hot and sticky summer, but just because the system makes you comfortable and makes the hottest months bearable doesn’t mean you want to hear it clanging and banging all summer. If you notice excess noise coming from your AC, it might be a problem that can be fixed by Efficient Systems, so some simple air conditioner maintenance could be in your future. Here are some common causes of excess noise from an air conditioner and what you can do to fix them.

  • Blower – The blower is a motor and fan blade assembly. If the blade touches the housing or if the motor needs a tune up, it might start to make excess noise. Loose screws, foreign objects, or a need for oiling or new parts will all cause noise problems but they are all easy fixes.
  • Ductwork – If the sounds you’re hearing are in the ductwork or vents, it may be due to expansion and contraction in your ventilation system. This is normal and while it may be obnoxious, it tends not to persist during the hottest months as temperature won’t fluctuate as much.
  • Bubbling Sounds – If you hear a gurgly or bubbly noise coming from your indoor unit, it may be due to a blockage in the condensate line. The easiest solution is to clean the condensate line and check for any clogs or blockages in the system.
  • Clicking Sounds – If you hear a clicking sound, it is likely from the relay or contactor in the system. If this is the case, have a professional check it right away. Electrical problems are not to be taken lightly where your air conditioner is concerned.
  • Foreign Objects – Sometimes, the condenser fan will make a lot of loud noise because foreign objects get stuck in there. Sticks, leaves, toys, food from small animals – it can all get stuck in the fans and make a tremendous amount of noise. Keep the area around your condenser unit clear of debris and check it often if you hear loud noises.

Most noises from your central air conditioning unit are explainable and can be fixed relatively easily. If you cannot find the source of the noise, however, and it is only getting worse, call Efficient Systems before the problem grows.

Tags: , ,
Posted in Air Conditioners in Orangefield, Air Conditioning, Air Conditioning Maintenance | Comments Off

Batson Heating Tip: What Does a Furnace Fan Limit Switch Do?

Monday, January 2nd, 2012

When researching your Batson home’s furnace and potential problems it might have, you’ve probably run across a few references to the fan limit switch. And while you know that it can break in a number of ways, do you know what the switch does and what you should look for when checking your furnace its air handler for problems?

What the Limit Switch Does

To put it very simply, the furnace fan limit switch is a control that tells your furnace’s fan when to turn on and off. So, when the furnace isn’t on, it tells the blower not to operate (and send cold air into your home) and when the furnace is on, it tells the blower to turn on and start circulating the warm air.

While the primary function of the limit switch is to turn the blower fan on and off, it also has a safety role. When the temperature in the air supply plenum gets too hot, the limit switch turns off the furnace boiler to keep there from being any damage from overheating. This is handy if there is a blockage in the air vents or the controls are messed up due to water damage or improper adjustments to the settings.

Looking for Problems

Most of the time, when there is an issue with your furnace turning off or on frequently, the limit switch is one of the first things you will check. Because the switch is electronic and is attached to a thermostat which measures temperature in the air supply plenum, a small problem can result in it not working properly. So, you can easily check it by temporarily bypassing the switch and seeing if your device turns on or off properly.

In many cases, if the limit switch is the problem, you will still need to call a Batson professional for replacement, but you can avoid a lot of headaches related to tracking down the source of the problem. If you suspect a limit switch problem, make sure to call someone immediately, because it does provide an important safety function and because without it your furnace won’t cycle on and off properly.

Tags: , , , , , ,
Posted in Heating | Comments Off

Things You Can Do to Make Your Orangefield Heating and Cooling System More Effective

Monday, December 5th, 2011

Have you ever wondered why it is too hot or too cold in your Orangefield home? You can always blame it on the thermostat or an open or closed window. Those are easy targets. But maybe the real culprit is your heating and cooling system, namely your furnace or air conditioner. Maybe these pieces of equipment have to work extra hard because of something as simple as a dirty filter that you should have cleaned or replaced.

Learning how to make your heating and cooling system more “effective” does not require a physics degree or an extensive knowledge of the refrigeration cycle. In most cases, it just takes common sense – and a little creativity.

For example, did you know that how your home is insulated can have a direct impact on how well your heating and cooling equipment functions? It sure can. If your walls, crawl spaces, or attic is poorly insulated or not insulated at all, your furnace and air conditioner will have to work harder to keep up – and keep you warm or cool. In some cases, your heating and cooling equipment might never be able to give you the desired temperature on your thermostat setting because the equipment has to work too hard to make up for lost heat or cooling due to poor insulation.

So what should you do? Find out if your home is properly insulated by having a load calculation or energy audit on your home. Any licensed and qualified heating and cooling contractor will be able to perform one of these tasks for you and show you where you might be losing too much of your indoor air to poor insulation. This same test can also detect any leakage through cracks in the foundation or joints or connections in ductwork. Windows and skylights are also an area of heat loss or gain. Installing awnings or trees can cut down on this loss or gain, too.

One way to make a heating and cooling system operate more effectively is to combine insulation and leak sealing. Here’s how that works. Uninsulated metal ductwork can make a heating and cooling system work harder, especially when it is located in poorly insulated areas like crawlspaces and attics. Warm air moving through a cold space slows the heating process and makes a furnace work harder to achieved desired temperature settings. Similarly, cool air passing through hot metal ductwork makes the air conditioner work harder. By wrapping insulation around the metal ductwork, you can stop heating or cooling your attic and crawlspace and send that conditioned air to the rooms that need it.

Another way to “assist” your heating and cooling system is to help with its air flow. In some homes, floor vents are built near outside walls or windows. Warm or cool air is vented up along the walls and windows and never flows evenly in the room. The solution is to buy inexpensive plastic air diverters which attach to the vents using magnets on the diverter. You can adjust the diverter to changing the air flow to the places that need it most – occupied spaces.

Of course, the most effective heating and cooling system is one that is serviced and properly maintained on a regular basis. If you have any questions on system maintenance, call your local heating and cooling contractor and schedule a tune-up today.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

Common Heat Pump Problems: A Guide from Orangefield

Friday, November 18th, 2011

Heat pumps are great pieces of machinery to have in your Orangefield home, but they are not perfect. They come with their own problems and issues. Usually these can be fixed pretty easily, but it’s good to know what you are looking for.

Below are some common problems encountered by heat pump owners, along with some brief troubleshooting and repair advice. However, for any serious repair job, it is recommended that you call in a professional to fix the problem. This is to ensure the best performance of your heat pump, as well as for your own safety.

  1. No Heat – Obviously, this is a problem. A heat pump should do two things—heat and cool. If it’s not heating at all, something is wrong. Sometimes, this is just a matter of the power supply being interrupted. Press the “Reset” button on the power supply. If that does not fix it, it could be that the power supply has failed or the motor is overloaded.
  2. Incorrect Temperature – For example, you set the thermostat at 72 degrees, but even after several hours, the temperature won’t get over 70 degrees. This can be a problem with the sensor in the thermostat or with the heat pump itself. However, it could also just be the result of very cold temperatures outside. Heat pumps have trouble keeping up when the weather is consistently below 30 degrees Fahrenheit or so, so it may just need help in the form of a supplemental heat supply.
  3. It’s Noisy – Heat pumps are generally designed to run very quietly, so if you notice a lot of noise, there is probably something going on. Common culprits for this type of issue include loose connections, like screws, nuts and bolts. Check for any loose fittings on the heat pump. Also, make sure the contractor who does your annual heat pump inspection tightens these fittings as part of his maintenance routine.
  4. Frozen – This can be indicative of a few underlying problems, but the most common is dirt in the air filter. When filters get clogged, the heat pump can get frosted, ultimately leading to freezing. Check the air filter and make sure to change all air filters regularly.

Heat pumps can experience other issues, but these are some of the more common ones. Generally, though, heat pumps are pretty headache-free machines. Be sure to call a professional repair person is you experience any issues with your heat pump.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

What Does the EPA Do for Indoor Air Quality? A Question from Bevil Oaks

Friday, October 28th, 2011

There are a number of agencies in the United States dedicated to protecting the health and wellbeing of citizens. What does that mean for you in Bevil Oaks? It means many of the rules and regulations related to indoor air quality are directly overseen by the EPA and the US government. For a better idea of how this impacts your currently lifestyle, here’s a quick look at what the EPA does.

Formation

The Environmental Protection Agency was formed in 1970 by Richard Nixon and the US Congress to oversee the regulation and oversight of air, water, land and hazardous waste. In short, the EPA works to keep our environment clean and safe.

The EPA and Homeowners

While much of what the EPA does relates to corporate pollution, regulations for manufacturing and consumer products, and development of safe methods of production for things like oil, food and water, the EPA has a big hand in ensuring your home stays safe.

Specifically, the EPA started and oversees the Energy Star program to help consumers purchase appliances and HVAC systems that use the least possible energy. Additionally, the EPA oversees the measurements and minimum requirements for home insulation and ventilation. This has as direct impact on indoor air quality.

Current EPA regulations are based on the ASHRAE Standards for low rise buildings and has been revised in the last two decades to ensure proper ventilation and insulation to reduce energy waste and maintain clean, fresh air.

The clean air act has a big impact on how homes are ventilated and maintained and the EPA does a lot of public service work to educate the public on ways to stay safe, including a recent campaign to get your home tested for radon – a potentially life threatening gas that can exist in any home, regardless of age.

Getting to Know the EPA

If you have an indoor air quality or suspect there may be issues in your home, one of the best resources on the Internet is the EPA’s indoor air quality website. It contains laws and regulations that impact your home (if you plan on remodeling or adding on to your home) and dozens of resources for testing and understanding the levels of pollutants in your home.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

What Features Should I Look for When Buying an Air Conditioner? A Question from Batson

Wednesday, October 19th, 2011

There are so many different types and styles of air conditioners on the market these days in Batson, it can be difficult to figure out what features are worth paying attention to when it comes time to buy one for yourself.

Of course, the most important thing to do is make sure you get an air conditioner that’s appropriately sized for the space you’re trying to cool. But what should you look for beyond that? Here are a few features you might like to have on the unit you purchase:

  • Energy Efficiency – The more energy efficient your air conditioner is, the less your cooling costs will be. It’s as simple as that. So when you’re evaluating devices, remember that it’s worth paying a little bit more up front for a more energy efficient unit. It will save you money in the long run and you’ll be doing your part to help the environment.
  • Dehumidification – Just about every air conditioner controls humidity to a certain extent in addition to cooling. But some do this better than others. There are also air conditioners with separate dehumidification settings for those days that are more humid than hot. Even when you need both cooling and dehumidification, it’s nice to have control of each of these independently.
  • Timer – Being able to program your air conditioner to switch on and off at different times of day is more than just convenient; it will save you money. You don’t want to leave your air conditioner running all day when you’re not home, but it sure is nice to come home to the comfort of an air conditioned space. If your air conditioner has a timer, you can have both. Just set the unit to come on a half hour or so before you get home and you’ll enjoy cool, refreshing indoor comfort right when you get home without paying through the nose to keep your home cool when no one is there.
  • Easy-to-Use Controls – As simple as this one seems, you might be surprised at how inconvenient the controls on some air conditioners can be. So when you’re evaluating your options, make sure you research how easy each unit is to operate. This can definitely save you from plenty of frustration in the long run.

Air conditioners come in many different shapes and sizes. To make sure your decision works best in your home, do your research well in advance.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Simple Filter Tips From Liberty on How to Keep Your Ducts Clean

Monday, September 19th, 2011

If there’s one thing you can count on with a home comfort system in Liberty, it’s that there will be higher energy bills in the summer and an increase in dust and debris in your ductwork. But, luckily the latter can be fixed with a few simple filtration upgrades in your home.

The Nature of a Forced Air System

When you flip the switch on your thermostat and your air conditioner or furnace turns on, it starts drawing air from inside your house, conditioning it to the right temperature, and then circulating it back into your rooms through an air handler and ductwork. Of course, a good system should have proper ventilation to circulate new air into the house, but let’s face it – no matter how much ventilation you have in your home, there will always be dust and debris from things like pets, plants and other common household items.

So, when the air gets circulated back through the ducts, all sorts of debris and sediment build up. That’s not to mention the possible presence of actual contaminants like bacteria or mold. Luckily, because of how your forced air system is built, these are not tough problems to deal with.

Installing the Right Filters

Filtration is incredibly important for adding the right level of protection to your home’s ductwork. Usually placed directly within your air handlers, whole house air filters are designed to capture particles as small as 0.3 microns (if you purchase a high quality HEPA filter). That pretty much covers all dust, sediment, pollen, dander and other common allergens.

There are a number of other upgrades you can make to capture just about everything you house spits into those ducts – from bacteria and viruses to smoke and other air pollutants, but at the very least a good filter system will save your lungs, cut back on duct cleaning costs and make it much easier to maintain your home’s air quality throughout the year.

To learn more about HEPA filters and the specific ratings offered in various products, here is a link to the EPA’s guide to home air cleaners. It has a handy breakdown of different types of filtration and what each filter grade can capture.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

Why Are Cleans Filters So Important to AC Efficiency? A Question From Silsbee

Wednesday, September 14th, 2011

Air conditioners cost a lot of money to operate in Silsbee – especially when they don’t work at 100% efficiency. So, it is important to perform the various regular maintenance tasks that ensure the system uses as little electricity as possible. The first thing on your list (and the easiest) is cleaning those filters.

Keeping Filters Clean

The Department of Energy’s Energy Savers website states that you can reduce your air conditioner’s energy consumption by as much as 15% simply by keeping the air filters clean. Why do they matter so much? Consider the nature of a filter.

The filter on your AC unit is designed to capture any dust, debris and sediment in the air supply. If that dust and sediment was allowed in, not only would it gum up the mechanical workings of the device, it would get into your ductwork and reduce the air quality of your home. So, filters are used to capture such things. However, when a filter gets clogged, the system must work harder to draw the air in. As it works harder, the motor turns faster and more electricity is used.

It takes very little to clog the filter of an AC unit, especially if it is running 24 hours a day for two or three months out of the year. So, it’s best to check your filters once every 30 days regardless of what type of filter you are using.

Which Filters to Check

The main filter on your AC unit should be checked along with any air handler filters and any air cleaner filters you have installed in your system. Another thing to consider is the condition of your home and the area around your outdoor condenser. If you have pets, lots of plants or your condenser is located in a dusty area, you may need to check and change those filters even more often.

Most filters are located along the return length of the ductwork – sometimes in ceiling ducts and walls, though they may also be located in your furnace’s air handler or inside the air conditioning unit. If you have window units or mini splits, the filters are frequently in the unit.

Clean air filters are important for your health, your wallet and the longevity of your AC system. Stay on top of them and you will save money in more ways than you might expect.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off