Posts Tagged ‘Raywood’

Raywood Heat Pump Installation Question: Do I Need to Supplement a Heat Pump with Another Heating System?

Monday, January 9th, 2012

People often turn to heat pumps as a solution for their Raywood home heating and cooling needs because they want a single, all-inclusive system that covers all the bases. The convenience and simplicity is part of the allure of choosing a heat pump to begin with.

However, it’s not always that simple. There are situations where a heat pump is not enough to handle the needs of the whole home. This doesn’t necessarily mean that the whole idea goes out the window, but the heat pump may need some help in the form of a supplementary heating supply.

Here are some reasons/situations that may call for a supplemental heat source in addition to a heat pump:

  1. A Cold Climate – Although heat pumps can serve as the primary heating system when temperatures drop as low as 30 degrees Fahrenheit, they have trouble keeping up when the cold snap lasts longer than a few days. In any climate where temperatures dip below this mark for a length of time, a supplemental heating system is recommended.
  2. A Large Home – Heat pumps come in many different sizes, but if yours does not have the capacity to match the size of your home, then it won’t be able to heat the whole house. It’s as simple as that. If you are installing a new heat pump, be sure to get one that is properly sized. But, if you have an existing heat pump that is overmatched by your home’s size, simply supplementing it may be the easiest solution.
  3. The Power Goes Out – A heat pumps’ use of electricity is a benefit in most situations, but unfortunately it means they are helpless when the power goes out. To avoid suffering in the winter chill when a storm takes out a local power line, have a backup/supplemental heat source on hand to use until the power comes back on.

Those are a few situations you may encounter in which supplementing a heat pump is a good idea. Remember, though, that each situation is different. When installing a new heat pump, consult with the professional installer beforehand to see if you should also have a supplemental heat system in addition to the heat pump in your Raywood home.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Rye Heating Repair Tip: Causes of Delayed Furnace Ignition

Friday, January 6th, 2012

Delayed ignition is usually accompanied by a loud banging or booming sound that resembles a small explosion in your gas appliance. In your Rye home’s furnace, this can be terrifying and should never be ignored.

What Causes Delayed Ignition

Delayed ignition usually happens when you first turn on your furnace, often after a long delay between use, so usually early in the fall or late in the spring when you don’t necessarily have it on every day of the week.

What happens is moisture builds up over the course of a period of inactivity and begins to corrode the firebox in your furnace. That corrosion builds up to the point that it starts to block the ports that feed gas into the burners. When these ports get blocked, the burners down the line cannot light and when you flip the switch, they won’t light immediately.

Of course, while rust and corrosion are a risk, lint and dust can be equally problematic (and are more common if you don’t have your furnace cleaned properly each fall). Sulfur build up is also a possibility, as it is left behind by burning natural gas. It will appear as a layer of white on the surface of the burners or the pilot light.

When all of this happens and the ports are not cleaned properly, gas will build up in the chamber after it is turned on and, when it finally ignites, create the small boom sound. It doesn’t just sound like an explosion – it is one – and if ignored, it can become incredibly dangerous.

Solving the Problem

Delayed furnace ignition is an easy problem to avoid. All you need to do is have your furnace cleaned properly before turning it on each fall. A technician will clean the burners and ports and remove any dust, lint, rust or sulfur buildup that might block ignition and cause a delay.

When replacing your furnace, look for a device with corrosion resistant materials. You can learn more about these when it comes time to replace your furnace from a technician. Most importantly, be careful. It may be a small problem now, but if left to build up over time, that small boom can become a much larger one.

Tags: , , , , , ,
Posted in Heating | Comments Off

Sour Lake Contractor’s Guide: How to Handle Your Finicky Heat Pump

Wednesday, December 7th, 2011

A heat pump is designed to keep your Sour Lake home comfortable. Warm weather, cold weather – it doesn’t matter. It should turn on when you need it and turn off when you don’t. So, when the device starts turning on and off without reason or when you need it to stay on, what exactly is the problem and how can you fix that problem without losing the heating or cooling capacity of your device.

Common Causes of the Problem

There are a number of reasons why your heat pump would turn off shortly after turning on, and most of the time this occurs in heating mode. If it occurs in cooling mode, you should have the device inspected immediately because there is likely something wrong with a core component like the compressor. For heating mode issues, here are some common problems:

  • Dirty Coils – If the coils are dirty, the device won’t be able to properly operate, especially if it has been some time since the last cleaning. Both sets of coils need to be cleaned at least once a year to avoid this becoming a problem.
  • Low Refrigerant Charge – If the refrigerant gets low, you’ll need to have it recharged because the pressure in the device will drop and it will therefore turn off after a few minutes of use.
  • Defrost Timer – If the defrost timer is forcing the device into a defrost cycle too often (usually it is set to 30, 60, or 90 minutes), the fan might turn off every few minutes after turning on. This is a common problem and is usually due to a thermostat or switch issue which can be fixed relatively easily.

Another thing to ask yourself when this problem occurs is whether the device is heating properly when on. Defrost timer issues don’t usually impinge on the heating ability of the device, while low refrigerant can. You want to make sure the device is working properly when on and not just cycling on and off without heating capacity.

Based on what you find, you’ll need a technician to take a closer look and ensure everything is working properly. Most repairs for this type of problem are relatively simple. And if you find something wrong, call an HVAC contractor.

Tags: , , ,
Posted in Heat Pumps | Comments Off

Warning Signs of a Broken Furnace: A Tip from Raywood

Monday, November 7th, 2011

How do you know when your furnace is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your Raywood home of heat and comfort, it also can be deadly, too.

Let’s look at some of the warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your local heating professional for a heating system tune-up.

Tags: , , , , ,
Posted in Heating | Comments Off

How Much Maintenance Do Solar Panels Require? A Question From Bevil Oaks

Friday, October 7th, 2011

The most commonly cited benefits of solar panels are that they are eco-friendly and cost effective for your Bevil Oaks home. Many resources on the subject are quick to point out that despite high upfront costs, solar panels pay for themselves over time by being durable enough to provide cheap energy for a long time. You know all this, but as a homeowner, you also need to know what kind of maintenance is involved in a solar system. In short, after investing your cash, how much work will you put in?

The amount of maintenance required by solar panels is fairly low, as they are quite durable and the only truly vulnerable component is the glass face. There are some steps that you can take to maintain and extend the life of your solar system, though. Below are some routine maintenance tips.

Cleaning

There are quite a few things you can do to keep your solar panels in tip top shape. For example, you should clean your solar panels regularly with water and dish soap to remove any surface grime. There are also surface sprayers available which allow you to clean your panels effectively from the ground.

You should avoid installing panels in a location where they will attract dust, grime and bird droppings, such as near trees, branches, or other growth. Remember that your solar panels are only as good as the energy they can capture, so keeping them clean is much more than a simple cosmetic measure.

Inspecting

To ensure they continue to work properly, you should examine your solar panels regularly according to the manufacturer’s instructions. Clean away any dirt or debris and tighten any loose connections. Should your panel become damaged in any way, for example by severe weather or blown down branches, have it repaired immediately.

If your system has a backup battery, be sure to replace the batteries as they wear down. There will be a noticeable decline in performance when this happens. Also inspect the connections on both the batteries and the inverter to ensure they are tight.

Generally speaking, solar panels themselves don’t require much maintenance. Simply keep them clean and inspect them regularly and they should last a good long while. Other components, such as backup batteries or generators, inverters, and additional arrays will require extra maintenance as well. For the most part, installing a solar system will not add much to your usual household maintenance tasks.

Tags: , , , , ,
Posted in Solar | Comments Off

Your HVAC System and Electricity: A Tip From Buna

Wednesday, October 5th, 2011

While not every HVAC system in your Buna home requires electricity, many of them do. Your air conditioner, electric furnace or water heater and ventilation system all need access to the central power line. So what does that mean for your system and what problems should be you beware of?

How Your HVAC System Uses Electricity

How your HVAC system works depends largely on which components need electricity to operate. Here is a quick summary of how each system uses electricity:

  • Air Conditioning – Most air conditioners are electric and therefore use electricity based on the number of BTUs produced. For example, if your air conditioner produces 25,000 BTUs and has a SEER of 16, it can produce 16 BTUs for every watt of electricity consumed per hour. As a result, it consumes 1,562.5 watts per hour when the system is running at maximum capacity. If it runs at full capacity for 8 hours per day, 30 days a month in the summer, that’s 375 kilowatt hours – which is the measurement unit you’ll see on your electric bill.
  • Heating – Your heating system may not use electricity, as many homes today use gas or oil combustion furnaces or boilers to produce heat. However, if you have an electric furnace, that electric power is used to heat the filament in the furnace. Electricity also powers the blower fan motor which pushes air across the filament and into the air handler. An electric furnace sized to heat a 1500 square foot home can use up to 8,000 watts per hour to produce enough heat for your home. That converts to roughly 5,000 kilowatt hours per month. The current price of electricity will determine how much this actually costs, you but it can really add up quickly.
  • Ventilation – Your ventilation system is almost always going to use electricity to circulate and filter air. While mechanical filters rely on the movement of air to remove certain particles, ventilation systems have a variety of components including fans and possibly even condenser coils to conserve energy as air is exchanged between the inside and outside.

Electricity plays an important role in your HVAC system no matter how your system works. To ensure yours continues to operate as intended, have your power system checked on a regular basis when the rest of your HVAC system is serviced.

Tags: , , , , , ,
Posted in Air Conditioning, Heating | Comments Off