Posts Tagged ‘Rye’

Rye Heating Repair Tip: Causes of Delayed Furnace Ignition

Friday, January 6th, 2012

Delayed ignition is usually accompanied by a loud banging or booming sound that resembles a small explosion in your gas appliance. In your Rye home’s furnace, this can be terrifying and should never be ignored.

What Causes Delayed Ignition

Delayed ignition usually happens when you first turn on your furnace, often after a long delay between use, so usually early in the fall or late in the spring when you don’t necessarily have it on every day of the week.

What happens is moisture builds up over the course of a period of inactivity and begins to corrode the firebox in your furnace. That corrosion builds up to the point that it starts to block the ports that feed gas into the burners. When these ports get blocked, the burners down the line cannot light and when you flip the switch, they won’t light immediately.

Of course, while rust and corrosion are a risk, lint and dust can be equally problematic (and are more common if you don’t have your furnace cleaned properly each fall). Sulfur build up is also a possibility, as it is left behind by burning natural gas. It will appear as a layer of white on the surface of the burners or the pilot light.

When all of this happens and the ports are not cleaned properly, gas will build up in the chamber after it is turned on and, when it finally ignites, create the small boom sound. It doesn’t just sound like an explosion – it is one – and if ignored, it can become incredibly dangerous.

Solving the Problem

Delayed furnace ignition is an easy problem to avoid. All you need to do is have your furnace cleaned properly before turning it on each fall. A technician will clean the burners and ports and remove any dust, lint, rust or sulfur buildup that might block ignition and cause a delay.

When replacing your furnace, look for a device with corrosion resistant materials. You can learn more about these when it comes time to replace your furnace from a technician. Most importantly, be careful. It may be a small problem now, but if left to build up over time, that small boom can become a much larger one.

Tags: , , , , , ,
Posted in Heating | Comments Off

Common Heat Pump Problems: A Guide from Orangefield

Friday, November 18th, 2011

Heat pumps are great pieces of machinery to have in your Orangefield home, but they are not perfect. They come with their own problems and issues. Usually these can be fixed pretty easily, but it’s good to know what you are looking for.

Below are some common problems encountered by heat pump owners, along with some brief troubleshooting and repair advice. However, for any serious repair job, it is recommended that you call in a professional to fix the problem. This is to ensure the best performance of your heat pump, as well as for your own safety.

  1. No Heat – Obviously, this is a problem. A heat pump should do two things—heat and cool. If it’s not heating at all, something is wrong. Sometimes, this is just a matter of the power supply being interrupted. Press the “Reset” button on the power supply. If that does not fix it, it could be that the power supply has failed or the motor is overloaded.
  2. Incorrect Temperature – For example, you set the thermostat at 72 degrees, but even after several hours, the temperature won’t get over 70 degrees. This can be a problem with the sensor in the thermostat or with the heat pump itself. However, it could also just be the result of very cold temperatures outside. Heat pumps have trouble keeping up when the weather is consistently below 30 degrees Fahrenheit or so, so it may just need help in the form of a supplemental heat supply.
  3. It’s Noisy – Heat pumps are generally designed to run very quietly, so if you notice a lot of noise, there is probably something going on. Common culprits for this type of issue include loose connections, like screws, nuts and bolts. Check for any loose fittings on the heat pump. Also, make sure the contractor who does your annual heat pump inspection tightens these fittings as part of his maintenance routine.
  4. Frozen – This can be indicative of a few underlying problems, but the most common is dirt in the air filter. When filters get clogged, the heat pump can get frosted, ultimately leading to freezing. Check the air filter and make sure to change all air filters regularly.

Heat pumps can experience other issues, but these are some of the more common ones. Generally, though, heat pumps are pretty headache-free machines. Be sure to call a professional repair person is you experience any issues with your heat pump.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Why the SEER Is Important When Choosing an Air Conditioner: A Tip From Saratoga

Friday, September 9th, 2011

There are many things to take into account when you are trying to pick out a new air conditioning system in Saratoga. You want one that will be powerful enough to cool the required space but not so big that it turns your home into a walk in freezer. With so many models and types on the market, it can be difficult to figure out what details you need to pay attention to and what you can ignore.

The seasonal energy efficiency rating (SEER) that each air conditioner comes with is not something you should ever disregard, however. This number is a reflection of the overall energy efficiency of the unit and it can have a huge impact on the amount you pay to keep running your air conditioner every month. The higher the SEER of a product, the more energy efficient it is and the lower your monthly bills will be.

Of course, air conditioners with a higher SEER also generally come with a higher price tag, so you will have to weigh the amount of your potential savings against the difference in price of units with different SEERs.

To calculate this, you will need to know exactly how much more energy efficient one model is compared to the others. For instance, when you know that an air conditioner with a SEER of 11 is 7% more efficient than one with a SEER of 10, you are in a better position to evaluate the potential savings.

You will still need to translate this into dollars, of course, because the amount you save with a 7% boost in efficiency will depend largely on how much you typically pay already. If you are only paying around $320 a year with a SEER 10 air conditioner, upgrading to a SEER 11 will only save you about $30. However, if your annual cooling bills are closer to $1000, you will easily save close to $150 with this small upgrade.

SEER numbers go much higher than 10 and 11 too. In fact, the highest you will probably get is a 19.5 SEER, but that will more than cut your cooling bills in half if you are starting with a SEER 10. Still, the actual amount that you will save depends on how much you were paying to begin with, but if your cooling bills are already very high, it may be worth it to invest in an expensive but very high efficiency system.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off